iO HVAC Controls ZP2-HC-ESP 2-Zone Single Stage (1H/1C) Heat/Cool Zone Panel With Built In ESP Functionality Features:
- Item 31663.
- Single Stage (1H/1C) Heat/Cool Zone Panel with built in ESP functionality includes pressure sensor.
- 10 years warranty.
Features and Benefits:
- Built-in static pressure control eliminatesthe need for a bypass damper
- Auto changeover
- First call priority with time share
- LED status indication
- Independent fan control by zone
- Short cycle protection
- Competitively priced
- Works with 2 or 3 wire zone dampers*
- Adjustable high limit
- Adjustable high and low balance point (HPS)
SPECIFICATIONS:
CONSTRUCTION:
- Aluminum enclosure with snap-on panel cover
PC BOARD MOUNTING:
- Individual Snap Track mounted to enclosure base
OPERATING TEMPERATURE:
- -40° F to 150° F
OPERATING HUMIDITY:
- 5% to 90% RH non-condensing
WIRING:
- 18-gauge wire for all equipment and component connections
TIME DELAY:
- 3 minutes off between cooling calls
- 3 minutes off on low limit
- 20 minute time share
SENSORS:
- ZPA-DTS Discharge Temperature Sensor
- NTC Type 3, 10K @ 77° F, +/- 3% @ 77° F
THERMOSTATS:
- Single-stage heat / cool thermostats
- Programmable or non-programmable
- Auto or manual changeover
DIMENSIONS:
- 8.00” Height x 6.00” Width x 1.50” Depth
FIELD WIRING TERMINALS:
ZONE THERMOSTATS:
- C: 24Vac (Common)
- R: 24Vac (Hot)
- W: First Stage Heat
- Y: First Stage Compressor
- G: Fan
DAMPER OUTPUTS:
- PC: Powered Close
- C: Common
- PO: Powered Open
HIGH/LOW LIMIT:
- DA: Land to ZPA-DTS
- DA: Land to ZPA-DTS
HVAC EQUIPMENT:
- R: 24Vac Equipment Hot
- W: First Stage Heat
- Y1: First Stage Compressor
- G: Fan
PANEL POWER:
- C: 24Vac (Common)
- H: 24Vac (Hot)
PRESSURE SENSOR:
- 2: Land to ZPA-SPS
- 3: Land to ZPA-SPS
iO HVAC Controls ZP Series The ZP2-HC-ESP is the most contractor-friendly reseditional zoning solution today. The ZP2-HC-ESP is designed to fit up to two zone applications for single-stage heat/cool systems in residential and light commercial applications. This zone control system comes with built in ESP static pressure control which eliminates the need for a bypass damper when used with 3-wire, 24V dampers.
Related Units, Accessories, And OEM Replacement Parts
