FloAire DU180H-2HP Wall Mount Direct Drive Centrifugal Upblast Exhaust Fan, 4100 CFM, 208V/3Ph
FloAire
(No reviews yet)
Write a Review
Write a Review
FloAire
FloAire DU180H-2HP Wall Mount Direct Drive Centrifugal Upblast Exhaust Fan, 4100 CFM, 208V/3Ph
$2,533.93
Usually Ships In 3-5 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- FloAire-DU180H-2HP-Wall
- Weight:
- 201.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Pennsylvania - Direct From FloAire
Description:
FloAire DU180H-2HP Direct Drive Centrifugal Upblast Exhaust Fan Features:
- Wall mount.
- DU180H High Speed Direct Drive Centrifugal Upblast Exhaust Fan.
- Disconnect switch.
- 18-3/4 inch wheel.
- Exhaust Fan handles 4100 CFM @ 0.250 inch wc ESP.
- Exhaust Fan handles 4100 CFM @ 0.250 inch wc ESP.
- Fan runs at 1221 RPM.
- Exhaust Motor: 2.000 HP, 3 Phs, 208 V, 60 Hz, 8.3 FLA, ODP, Premium (E-Plus3) Eff.
Hinge Kit
- Standard Hinge kit for exhaust fan roof curbs.
- Includes Hardware to attach hinge to curb and hinge to base.
- Ships Loose.
- Used on Fans with wheels 20 inches or smaller.
- 12 GA Galvanized.
Additonal Features
- Insulated Heat Baffle for Exhaust Fans.
- Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under
the motor of upblast and downblast fans.
- Cut to fit shaft wrapper and around vibration isolators and motor cooling hole.
- Caulked down to top plate.
- VFD Mounting bracket for DU/DR 180 and 200.
- VFD factory mounted and wired in unit control vestibule.
- ESV222N02YXB - Variable Frequency Drive - 3 HP Max., 200/240 V, Single or Three Phase Input, 9.6 A Max., NEMA 1 Enclosure, PART NEEDS PROGRAMMING - 208v, 1ph.
- VAV (Variable-Air-Volume) Wiring Package for Commercial Fans.
- Manual Speed Control Variable Frequency Drive Included.
- Grease Cup for kitchen-duty centrifugal exhaust fans.
- Box Dimensions: 17-1/8 L X 5-1/16 W X 3-3/4 H, 20 Gauge, Includes Down Spout.
- Exhaust Motor: 2.000 HP, 3 Phs, 208 V, 60 Hz, 8.3 FLA, ODP, Premium (E-Plus3) Eff.
Hinge Kit
- Standard Hinge kit for exhaust fan roof curbs.
- Includes Hardware to attach hinge to curb and hinge to base.
- Ships Loose.
- Used on Fans with wheels 20 inches or smaller.
- 12 GA Galvanized.
Additonal Features
- Insulated Heat Baffle for Exhaust Fans.
- Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under
the motor of upblast and downblast fans.
- Cut to fit shaft wrapper and around vibration isolators and motor cooling hole.
- Caulked down to top plate.
- VFD Mounting bracket for DU/DR 180 and 200.
- VFD factory mounted and wired in unit control vestibule.
- ESV222N02YXB - Variable Frequency Drive - 3 HP Max., 200/240 V, Single or Three Phase Input, 9.6 A Max., NEMA 1 Enclosure, PART NEEDS PROGRAMMING - 208v, 1ph.
- VAV (Variable-Air-Volume) Wiring Package for Commercial Fans.
- Manual Speed Control Variable Frequency Drive Included.
- Grease Cup for kitchen-duty centrifugal exhaust fans.
- Box Dimensions: 17-1/8 L X 5-1/16 W X 3-3/4 H, 20 Gauge, Includes Down Spout.
Related Units, Accessories, And OEM Replacement Parts
