Delta-Therm DTC-40-277 Freeze Protection Thermostat With Ground Fault Protection, 277V
Delta-Therm
(No reviews yet)
Write a Review
Write a Review
Delta-Therm
Delta-Therm DTC-40-277 Freeze Protection Thermostat With Ground Fault Protection, 277V
$599.94
Usually Ships In 2 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- Delta-Therm-DTC-40-277
- Weight:
- 10.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Massachusetts - Vendor Direct
Description:
Delta-Therm DTC-40-277 Freeze Protection Thermostat:
- 277V.
- With Ground Fault Protection.
- Single Point Thermostat device.
- Load switching capabilities.
- Economical solution to ground fault requirements for a single freeze protection circuit.
- Factory preset at 40F for ambient sensing or pipeline temperature.
- Economical solution to ground fault requirements for a single freeze protection circuit.
- Factory preset at 40F for ambient sensing or pipeline temperature.
- A Low Temperature Alarm function is available via jumper pin for pipeline sensing and is factory set
at 35F.
at 35F.
- You can activate the system for testing by placing the temperature sensor in ice water or by temporarily connecting
the supplied resistor across the sensor terminals.
- The device is capable of controlling up to a 40 amp circuit.
the supplied resistor across the sensor terminals.
- The device is capable of controlling up to a 40 amp circuit.
- Dry alarm contacts are provided for ground fault, remote sensor damage, or low temperature.
- Housed in a 9 inch x 6 inch x 5 inch polycarbonate NEMA 4X outdoorrated enclosure.
- Housed in a 9 inch x 6 inch x 5 inch polycarbonate NEMA 4X outdoorrated enclosure.
- Contains a UL Listed Class 2 transformer, UL Recognized contactor, and a low voltage control board.
- It requires a remote sensor for activation, and has a 3F differential.
- Once temperature is sensed falling past 40F, it will activate and stay activated until the temperature
reaches 43F. This helps eliminate short cycling.
- When used as an ambient thermostat, the low temperature alarm should be selected OFF.
reaches 43F. This helps eliminate short cycling.
- When used as an ambient thermostat, the low temperature alarm should be selected OFF.
- To allow the placement of the DTC-40 indoors or in a more convenient location, the remote temperature sensor has a 72 inch two-conductor lead wire.
- The lead wire can also be lengthened in the field to connect to the DTC-40.
NOTE: Use 22 AWG minimum wire gauge for extending the sensor length up to 500 feet. Use shielded wire if RF or
other electrical disturbances are of concern.
other electrical disturbances are of concern.
APPLICATIONS
- Single circuit applications where Ground Fault and Freeze Protection are required.
- Pipe Freeze Protection for unheated areas like garages or well pumps.
- Single circuit applications where Ground Fault and Freeze Protection are required.
- Pipe Freeze Protection for unheated areas like garages or well pumps.
APPROVALS
- UL Listed Class 2 Transformer.
- UL Recognized contactor.
- UL Listed Class 2 Transformer.
- UL Recognized contactor.
MONITORING AND ALARM FEATURES
- The cover of the DTC-40 has LED indicator lights for:
POWER
SYSTEM ON
ALARM
- The cover of the DTC-40 has LED indicator lights for:
POWER
SYSTEM ON
ALARM
- The cover includes pushbuttons for Ground Fault
TEST
RESET
TEST
RESET
FOR CUSTOM QUOTES
1) Download and complete the Pipe Trace RFQ Template above.
2) E-mail your completed RFQ template to customerservice@northstock.com.
Related Units, Accessories, And OEM Replacement Parts
Recently viewed products
