Bray SS-150-N-S-X/PAM24-100-FS 1-1/2 Inch Simple Set Adjustable PIC Valve, Standard Flow Cartridge, 24 VAC/VDC Actuator
Bray Commercial
(No reviews yet)
Write a Review
Write a Review
Bray Commercial
Bray SS-150-N-S-X/PAM24-100-FS 1-1/2 Inch Simple Set Adjustable PIC Valve, Standard Flow Cartridge, 24 VAC/VDC Actuator
$848.93
Usually Ships In 7-9 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- Bray-SS-150-N-S-X/PAM24-100-FS
- Weight:
- 20.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Texas - Direct From Bray
Description:
Bray SS-150-N-S-X/PAM24-100-FS 1-1/2 Inch Simple Set Adjustable PIC Valve, Standard Flow Cartridge, 24 VAC/VDC Actuator.
Simple Set pressure independent control valve model SS-150-N-S-X(GPM) features:
- 1-1/2 inch NPT threads.
- 40 mm.
Simple Set pressure independent control valve model SS-150-N-S-X(GPM) features:
- 1-1/2 inch NPT threads.
- 40 mm.
- Standard Flow cartridge.
- Minimum flow setting 2.86 GPM.
Factory installed actuator model PAM24-100-FS features:
- 24 VAC / VDC.
- Minimum flow setting 2.86 GPM.
- Maximum flow setting 36.10 GPM.
- Specify your flow setting at order entry, this is digit X in the PIC valve part number.
- Normally open, push down to close.
- Brass housing.
- Low pressure drop.
- Long stroke for greater control-ability.
- No minimum straight pipe lengths required before or after valve.
- For hot water, chilled water or 50/50 glycol solutions.
Factory installed actuator model PAM24-100-FS features:
- 24 VAC / VDC.
- Failsafe.
- On/Off, floating and modulating with feedback.
- Auto shutoff for end of travel.
- On/Off, floating and modulating with feedback.
- Auto shutoff for end of travel.
- NEMA 2 enclosure.
- Manual override.
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control and dynamic balancing into a single compact housing, eliminating the material and installation and commissioning costs of a separate balancing component.
The maximum flow rate is easily set by hand with an adjustment on the top of the valve. The unique design of the Simple Set provides full stroke of the control element, even when the flow rate setting is a small percentage of the maximum flow capacity of the valve. Simple Set valves achieve a continuous flow rate at any fixed position of the valve irrespective of inlet pressure change. This prevents overflow at any load condition, which contributes to optimal coil performance and primary equipment efficiency.
The PA(M) series is a line of linear motor actuators to be used primarily on Bray PIC Valves utilized in Building Automation Systems. These actuators are available with a multitude of options for On/Off/Floating or Modulating with or without electronic Failsafe. These actuators automatically calibrate to the stroke of the valve as soon as power is applied and are field selectable direct or reverse acting.
A simple, reliable, versatile solution for your Bray Commercial Simple Set pressure Independent control valve!
- Actuator Power:24V
- Valve Size (In.):1.5
Videos Hide Videos Show Videos
Related Units, Accessories, And OEM Replacement Parts
