QMark CDF548 Ceiling Heater, Heat Deck Only, 4/3/2KW, 208V/1-3Ph
QMark
(No reviews yet)
Write a Review
Write a Review
QMark
QMark CDF548 Ceiling Heater, Heat Deck Only, 4/3/2KW, 208V/1-3Ph
$822.65
5 In Stock, Orders Placed By 3pm EST Ship Same Day (Weekends And Holidays Excluded)
Free ground shipping to the lower 48 states
- Product ID:
- QMark-CDF548
- UPC:
- 685360015101
- Weight:
- 21.00 (Lbs.)
- Ships By:
- Free Ground, Or Choose Expedited Shipping At Checkout
- Ships From:
- NorthStock In Massachusetts
Description:
QMark CDF548 Ceiling Heater, Heat Deck Only, 4/3/2KW, 208 Volt 1/3PH 19.2/14.2/9.6A
The Qmark CDF Series Fan Forced Electric Commercial Down flow Ceiling Heater is designed for commercial and industrial areas that require electric fan forced heat such as vestibules, hallways, entryways, workshops, and rest rooms.
Features:
- Steel fins are copper-brazed to low-watt density, steel-sheathed, tubular heating elements which are arranged in a uniform grid pattern. The grid covers the entire intake area, resulting in uniform heating of all discharged air.
- Efficient five-bladed Aluminum fan and rugged impedance-protected, totally-enclosed motor.
- Built-In Fan Delay - Space temperature is controlled by a wall or unit-mounted thermostat. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life.
- Automatic Thermal Cutout - A thermal cutout shuts off the heater in the event of over-heating and reactivates the heater when the temperature returns to normal.
- Multiple Phase Heaters - The 208 and 240 volt heaters can be field converted from single to three-phase operation. 277 volt single-phase heater is also available.
- Multiple Wattage Heater Sections - The 5,000 watt heater can be field converted to 3,800 watts or 2,500 watts, and the 4,000 watt heater is convertible to 3,000 or 2,000 watts.
- Thumb pins align and temporarily hold the enclosure cover to the heating section freeing both hands to finish installation.
- Steel fins are copper-brazed to low-watt density, steel-sheathed, tubular heating elements which are arranged in a uniform grid pattern. The grid covers the entire intake area, resulting in uniform heating of all discharged air.
- Efficient five-bladed Aluminum fan and rugged impedance-protected, totally-enclosed motor.
- Built-In Fan Delay - Space temperature is controlled by a wall or unit-mounted thermostat. When the thermostat calls for heat, the heating elements and fan energize. When the thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life.
- Automatic Thermal Cutout - A thermal cutout shuts off the heater in the event of over-heating and reactivates the heater when the temperature returns to normal.
- Multiple Phase Heaters - The 208 and 240 volt heaters can be field converted from single to three-phase operation. 277 volt single-phase heater is also available.
- Multiple Wattage Heater Sections - The 5,000 watt heater can be field converted to 3,800 watts or 2,500 watts, and the 4,000 watt heater is convertible to 3,000 or 2,000 watts.
- Thumb pins align and temporarily hold the enclosure cover to the heating section freeing both hands to finish installation.
- Navajo White (Grill) Color.
- CDFSE “surface enclosures” are designed to mount flat on the ceiling and extend only 6 in. into the room.
- CDFRE “recessed enclosures” have no protrusions outside recess box, allowing the heater to recess only 7 in. into ceiling space. Mounts easily into standard 2' x 2' ceiling grid, in T-Bar or permanent ceiling with trim ring.
- Recessed Dimensions - 23-3/4” W x 23-3/4” L x 7” D.
NOTE:
- Heaters are factory wired for highest wattage, field convertible to lower wattages.
- 1 or 3 Phase heaters are factory wired for 1 phase, field convertible to 3 phase.
- CDF units are the heater assembly only and require either a surface mount (CDFSE) or recessed (CDFRE) enclosure.
Related Units, Accessories, And OEM Replacement Parts
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA