Berko FFCH548 Electric Ceiling Heater, Heat Deck Only, 4/3/2KW, 208V/1-3Ph
Berko
(No reviews yet)
Write a Review
Write a Review
Berko
Berko FFCH548 Electric Ceiling Heater, Heat Deck Only, 4/3/2KW, 208V/1-3Ph
$883.64
4 In Stock, Orders Placed By 3pm EST Ship Same Day (Weekends And Holidays Excluded)
Free ground shipping to the lower 48 states
- Product ID:
- Berko-FFCH548
- UPC:
- 685360026527
- Weight:
- 20.00 (Lbs.)
- Ships By:
- Free Ground, Or Choose Expedited Shipping At Checkout
- Ships From:
- NorthStock In Massachusetts
Description:
Berko FFCH548 Electric Ceiling Heater, 4/3/2KW, 208 Volt 1/3PH 19.2/14.2/9.6A
For commercial spaces that need unobtrusive comfort, install this downflow ceiling heater. Deliver powerful warmth to your office, conference room, lobby, waiting room or entranceway.
Berko FFCH Electric Ceiling Heater Series Features:
- FFCHSE “surface enclosures” are designed to mount flat on the ceiling and extend only 6 in. into the room.
- FFCHRE “recessed enclosures” have no protrusions outside recess box, allowing the heater to recess only 7 in. into ceiling space. Mounts in T-Bar or permanent ceiling with trim ring. Mounts easily into standard 2' x 2' ceiling grid.
- 208V and 240V heaters can be field-converted from single- to three-phase operation. 5,000-watt heater can be field-converted to 3,800 or 2,500 watts and 4,000-watt heater to 3,000 or 2,000 watts.
- BMS-compatible with use of relays.
- Three adjustable airflow patterns from 14 ft. ceilings: wide, narrow or asymmetrical patterns.
- Automatic/Built-in fan delay eliminates cold drafts on start-up and discharges residual heat from the heater body during shut down. Space temperature is controlled by a wall or unit-mounted Thermostat. When the Thermostat calls for heat, the heating elements and fan energize. When the Thermostat is satisfied, the elements shut off, but the fan continues to operate until all of the heated air is discharged. This feature avoids exposing the heater to residual heat, thus achieving a high comfort level and longer component life.
- Automatic thermal cutout: shuts off the heater in the event of overheating and reactivates heater when temperature returns to normal.
- Easy installation: Thumb pins align and temporarily hold enclosure cover to heating section freeing both hands to finish installation.
- Steel fins are copper-brazed to low-watt density, steel-sheathed, tubular heating elements which are arranged in a uniform grid pattern. The grid covers the entire intake area, resulting in uniform heating of all discharged air.
- Efficient five-bladed Aluminum fan and rugged impedance-protected, totally-enclosed Motor.
- Thumb pins align and temporarily hold the enclosure cover to the heating section freeing both hands to finish installation.
- Navajo White, phosphatized, baked enamel finish.
NOTES
- Heaters are factory wired for highest wattage, field convertible to lower wattages.
- 1 or 3 Phase heaters are factory wired for 1 phase, field convertible to 3 phase.
- Navajo White, phosphatized, baked enamel finish.
NOTES
- Heaters are factory wired for highest wattage, field convertible to lower wattages.
- 1 or 3 Phase heaters are factory wired for 1 phase, field convertible to 3 phase.
Related Units, Accessories, And OEM Replacement Parts
