![Markel TB3380A 2X2 T-Bar Mounting Kit Markel TB3380A 2X2 T-Bar Mounting Kit](https://cdn11.bigcommerce.com/s-kf91vy1qfw/images/stencil/500x659/products/47106/561631/markel-tb3380a-2x2-t-bar-mounting-kit__69906.1695208683.jpg?c=1)
Markel H3387D-RP Fan Forced Electric Ceiling Heater, 4.8KW, 240V/1Ph
Markel
$761.92
Usually Ships In 2-3 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Markel-H3387D-RP
- UPC:
- 686334366373
- Weight:
- 22.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Tennessee - Factory Direct
Description:
Markel H3387D-RP Fan Forced Electric Ceiling Heater Features:
- Catalog Number: 03663702.
- Model Number: H3387D-RP.
- KW: 4.8.
- BTU: 16382.
- Voltage: 240.
- Phase: 1.
- Amp: 20.
- CFM: 175.
- Weight (lbs): 22.
- Color: White.
- Agency Rating: ETL-CUS.
- Model Number: H3387D-RP.
- KW: 4.8.
- BTU: 16382.
- Voltage: 240.
- Phase: 1.
- Amp: 20.
- CFM: 175.
- Weight (lbs): 22.
- Color: White.
- Agency Rating: ETL-CUS.
Additional Features
- Fan purge circuit (requires 2 wire control circuit when remote wall thermostat is used with the unit).
- Disconnect switch.
- White powder coated 18 Gauge steel grill
- Manual reset thermal limit.
- Steel block fin element.
- Vane axial fan blade: 1.5KW - 4.0KW units: 700 RPM motor; 175 CFM 4.8KW units: 900 RPM motor; 200 CFM.
- Rough in dimensions: 14 3/16 Inch wide x 19 5/16 Inch high x 4 Inch deep.
- Grill dimensions: 15 3/8 Inch wide x 20 9/64 Inch high.
- Optional factory installed tamper resistant thermostat is available.
- Disconnect switch.
- White powder coated 18 Gauge steel grill
- Manual reset thermal limit.
- Steel block fin element.
- Vane axial fan blade: 1.5KW - 4.0KW units: 700 RPM motor; 175 CFM 4.8KW units: 900 RPM motor; 200 CFM.
- Rough in dimensions: 14 3/16 Inch wide x 19 5/16 Inch high x 4 Inch deep.
- Grill dimensions: 15 3/8 Inch wide x 20 9/64 Inch high.
- Optional factory installed tamper resistant thermostat is available.
- Made in U.S.A.
- California residents see Prop 65 Warnings.
- California residents see Prop 65 Warnings.
Additional Information
The heaters are to be constructed of a heavy gauge steel housing. The finish shall be baked-on powder coat in Ceiling White color. The units shall be available in ratings from 1500 through 4800 Watts with an optional factory installed single pole thermostat. The heaters have a low speed 600-RPM motor, which drives a vane axial blower to deliver a quite 175 CFM’s of down flow air. The heating element shall be of the block finned type with large, parallel steel fins for quick heat transfer. Unit shall have as standard, a manual reset capillary type limit control, for added safety. Unit weight 22 pounds.
The heaters are to be constructed of a heavy gauge steel housing. The finish shall be baked-on powder coat in Ceiling White color. The units shall be available in ratings from 1500 through 4800 Watts with an optional factory installed single pole thermostat. The heaters have a low speed 600-RPM motor, which drives a vane axial blower to deliver a quite 175 CFM’s of down flow air. The heating element shall be of the block finned type with large, parallel steel fins for quick heat transfer. Unit shall have as standard, a manual reset capillary type limit control, for added safety. Unit weight 22 pounds.
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA