Markel 8535 Commercial Slope Top Wall Convector, 5 Ft Long x 5 Inch Deep x 20 Inch High, 250 Watts/Ft, 1250 Watts
Markel
(No reviews yet)
Write a Review
Write a Review
Markel
Markel 8535 Commercial Slope Top Wall Convector, 5 Ft Long x 5 Inch Deep x 20 Inch High, 250 Watts/Ft, 1250 Watts
$1,317.35
Usually Ships In 7-8 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Markel-8535
- Weight:
- 15.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Tennessee - Factory Direct
Description:
Markel 8535 Commercial Slope Top Electric Wall Convector Features:
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.
- Custom built. Choose voltage and airflow configuration.
- 5 Ft Long.
- 5 Inch Deep.
- 20 Inch High.
- 250 Watts/Ft, 1250 Watts total.
Additional Features
- Choose voltage.
- Choose Front Inlet/Top Outlet OR Bottom Inlet/Top Outlet air pattern.
- 16 gauge steel housing powder coated with beige finish.
- Tubular pre-wired wireway with 40 Amp capacity.
- Connection boxes for right or left hand wiring with combination 1/2 inch - 3/4 inch knockouts at back and bottom.
- Stainless steel element with Aluminum fins.
- Linear limit type thermal overload with automatic reset.
- Limited by max amp draw of 25 Amps (with no controls).
- Made in U.S.A.
- Pencil proof louver design.
- Custom colors available, consult factory.
- Not for residential applications.
- Disconnect limits amperage to 16 Amps.
- California residents see Prop 65 Warnings
- 16 gauge steel housing powder coated with beige finish.
- Tubular pre-wired wireway with 40 Amp capacity.
- Connection boxes for right or left hand wiring with combination 1/2 inch - 3/4 inch knockouts at back and bottom.
- Stainless steel element with Aluminum fins.
- Linear limit type thermal overload with automatic reset.
- Limited by max amp draw of 25 Amps (with no controls).
- Made in U.S.A.
- Pencil proof louver design.
- Custom colors available, consult factory.
- Not for residential applications.
- Disconnect limits amperage to 16 Amps.
- California residents see Prop 65 Warnings
Additional Information
CABINET: Rugged 16 gauge front cover with discharge louvers in sloped top design. Pencil proof louver design for sloped outlet and front inlet grill. The finish shall be durable powder coated paint. Air flow available as bottom in - top out, or front in - top out.
ELEMENT: All steel high mass element construction with Nickel-Chromium resistance wire embedded in compacted efficient dielectric to ensure proper heat transfer. Aluminum fins mechanically bonded to steel tube allows for increased surface area and even heat transfer.
LIMIT CONTROLS: Automatic reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded.
WIRING: Connection boxes in either end with ½ inch to ¾ inch knockouts at back and bottom. Tubular prewired wire way with 40 Amp capacity.
CONTROLS: Optional built in tamper resistant thermostat and disconnect.
MOUNTING: Heater shall be surface mounted to wall or mullion. Bottom inlet units must be mounted a minimum of 4 inches above finished floor front inlet.
Related Units, Accessories, And OEM Replacement Parts
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA