Drain-All RH50-0LAAA 1/2 Inch NPT 170 PSI Rust Handler
Drain-All
$1,260.67
Usually Ships In 1-2 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Drain-All-RH50-0LAAA
- Weight:
- 21.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Missouri - Direct From Drain-All
Description:
Drain-All RH50-0LAAA 1/2 Inch NPT 170 PSI Rust Handler Features:
- Rust Handler.
- 1/2 inch NPT Inlet/Outlet.
- 1/4 inch NPT Control Air.
- 1/8 inch NPT Balance Line.
- 170 deg F Maximum Liquid Temperature.
- 170 psi Maximum Liquid Pressure.
- 40 psi Minimum Control Air.
- 130 psi Maximum Control Air.
- 1.5 gpm Maximum Flow at 100 psig.
- 11 inch Height.
- 9-1/4 inch Width.
- 10-1/2 inch Depth.
- Aluminum, Fiberglass Body.
- 2 pt Bowl Capacity.
- 10 sec Cycle Time.
- 36 Months Limited Warranty.
- Systems with very old, rusty piping.
- Rust and scale from older equipment.
- Sediment and debris from desiccant dryers.
- Handles severe rust and debris in liquid.
Additional Features
The Rust Handler is needed when there is severe rust and debris, as is found in old receiver tanks and piping, as well as old intercoolers/aftercoolers, that slough off scale.
- Rust Handler.
- 1/2 inch NPT Inlet/Outlet.
- 1/4 inch NPT Control Air.
- 1/8 inch NPT Balance Line.
- 170 deg F Maximum Liquid Temperature.
- 170 psi Maximum Liquid Pressure.
- 40 psi Minimum Control Air.
- 130 psi Maximum Control Air.
- 1.5 gpm Maximum Flow at 100 psig.
- 11 inch Height.
- 9-1/4 inch Width.
- 10-1/2 inch Depth.
- Aluminum, Fiberglass Body.
- 2 pt Bowl Capacity.
- 10 sec Cycle Time.
- 36 Months Limited Warranty.
- Systems with very old, rusty piping.
- Rust and scale from older equipment.
- Sediment and debris from desiccant dryers.
- Handles severe rust and debris in liquid.
Additional Features
The Rust Handler is needed when there is severe rust and debris, as is found in old receiver tanks and piping, as well as old intercoolers/aftercoolers, that slough off scale.