Crandall Stats & Sensors HC-201-CS&S Duct Humidistat
Crandall Stats & Sensors
$162.24
Usually Ships In 5-7 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- crandall-stats-sensors-hc-201-cs&s
- Weight:
- 3.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Crandall Stats & Sensors In IL
Description:
Crandall Stats & Sensors HC-201-CS&S Duct Humidistat Features:
- The HC-201-CS&S is an electric Two Position Humidity Controller for mounting in ducts.
- These low or line voltage units utilize a single pole-double throw switch rated at 3.6 FLA, 21.6 LRA or 8 resistive amps.
- These UL listed Controllers operate over a range of 15% to 95% Relative Humidity.
- The NO contact of the switch is marked “Brown”, the NC contact as “Red” and the Common contact is noted as “Orange”.
- The unit also has a green ground wire.
- The Controller’s mounting plate and housing are steel and aluminum.
- The sensing element is a nylon belt.
- Ambient temperature limits in which this device can be used are from 40 °F to 125 °F.
- Weights and Dimensions: Unit - 4-3/4 inch H x 6-1/2 inch W x 3-3/4 inch D.
- Replaces: HC-201-CS&S Schneider Electric HC-201.
- The HC-201-CS&S is an electric Two Position Humidity Controller for mounting in ducts.
- These low or line voltage units utilize a single pole-double throw switch rated at 3.6 FLA, 21.6 LRA or 8 resistive amps.
- These UL listed Controllers operate over a range of 15% to 95% Relative Humidity.
- The NO contact of the switch is marked “Brown”, the NC contact as “Red” and the Common contact is noted as “Orange”.
- The unit also has a green ground wire.
- The Controller’s mounting plate and housing are steel and aluminum.
- The sensing element is a nylon belt.
- Ambient temperature limits in which this device can be used are from 40 °F to 125 °F.
- Weights and Dimensions: Unit - 4-3/4 inch H x 6-1/2 inch W x 3-3/4 inch D.
- Replaces: HC-201-CS&S Schneider Electric HC-201.