Bray SS-050-N-L-X/PA24-27 1/2 Inch Simple Set Adjustable PIC Valve, Low Flow Cartridge, 24 VAC/VDC Actuator
Bray Commercial
(No reviews yet)
Write a Review
Write a Review
Bray Commercial
Bray SS-050-N-L-X/PA24-27 1/2 Inch Simple Set Adjustable PIC Valve, Low Flow Cartridge, 24 VAC/VDC Actuator
$218.35
Usually Ships In 7-9 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- Bray-SS-050-N-L-X/PA24-27
- Weight:
- 6.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Texas - Direct From Bray
Description:
Bray SS-050-N-L-X/PA24-27 1/2 Inch Simple Set Adjustable PIC Valve, Low Flow Cartridge, 24 VAC/VDC Actuator.
Simple Set pressure independent control valve model SS-050-N-L-X(GPM) features:
- 1/2 inch NPT threads.
- 15 mm.
Simple Set pressure independent control valve model SS-050-N-L-X(GPM) features:
- 1/2 inch NPT threads.
- 15 mm.
- Low Flow cartridge.
- Minimum flow setting .33 GPM.
Factory installed actuator model PA24-27 features:
- 24 VAC / VDC.
- Minimum flow setting .33 GPM.
- Maximum flow setting 3.08 GPM.
- Specify your flow setting at order entry, this is digit X in the PIC valve part number.
- Normally open, push down to close.
- Brass housing.
- Low pressure drop.
- Long stroke for greater control-ability.
- No minimum straight pipe lengths required before or after valve.
- For hot water, chilled water or 50/50 glycol solutions.
Factory installed actuator model PA24-27 features:
- 24 VAC / VDC.
- Non-failsafe.
- On/Off and floating.
- Auto shutoff for end of travel.
- On/Off and floating.
- Auto shutoff for end of travel.
- IP54 enclosure.
- Manual override.
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control and dynamic balancing into a single compact housing, eliminating the material and installation and commissioning costs of a separate balancing component.
The maximum flow rate is easily set by hand with an adjustment on the top of the valve. The unique design of the Simple Set provides full stroke of the control element, even when the flow rate setting is a small percentage of the maximum flow capacity of the valve. Simple Set valves achieve a continuous flow rate at any fixed position of the valve irrespective of inlet pressure change. This prevents overflow at any load condition, which contributes to optimal coil performance and primary equipment efficiency.
The PA(M) series is a line of linear motor actuators to be used primarily on Bray PIC Valves utilized in Building Automation Systems. These actuators are available with a multitude of options for On/Off/Floating or Modulating with or without electronic Failsafe. These actuators automatically calibrate to the stroke of the valve as soon as power is applied and are field selectable direct or reverse acting.
A simple, reliable, versatile solution for your Bray Commercial Simple Set pressure Independent control valve!
- Actuator Power:24V
- Valve Size (In.):0.5
Videos Hide Videos Show Videos
Related Units, Accessories, And OEM Replacement Parts
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA