Markel HF3B51100CA1 Fan Forced Electric Unit Heater, 100/75 KW, 240/208V/3Ph
Markel
$11,615.36
Usually Ships In 4-5 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Markel-HF3B51100CA1
- UPC:
- 686334721820
- Weight:
- 202.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Tennessee - Factory Direct
Description:
Markel HF3B51100CA1 Fan Forced Electric Unit Heater Features:
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.
- Catalog Number: 07218202.
- Model Number: HF3B51100CA1.
- Agency Rating: ETL-CUS.
- KW: 100/75.
- Voltage: 240/208.
- Amp Phase: 241/208.3.
- Phase: 3.
- BTUx1000: 341.3/256.
- Branch Circuit Protection: 350/300.
- Minimum Circuit Amps: 242.7.
- Control Circuit Amps: 1.25.
- Control Voltage: 24.
- Motor Rating HP: .75.
- Motor RPM: 1100.
- Motor Volt: 240.
- Motor Amp: 4.8.
- Mounting Height Horizontal: 22.
- Mounting Height Vertical: 40.
- Temperature Rise: 68/51.
- FPM Outlet: 1529.
- CFM: 5000.
- Air Throw: 65.
- Model Number: HF3B51100CA1.
- Agency Rating: ETL-CUS.
- KW: 100/75.
- Voltage: 240/208.
- Amp Phase: 241/208.3.
- Phase: 3.
- BTUx1000: 341.3/256.
- Branch Circuit Protection: 350/300.
- Minimum Circuit Amps: 242.7.
- Control Circuit Amps: 1.25.
- Control Voltage: 24.
- Motor Rating HP: .75.
- Motor RPM: 1100.
- Motor Volt: 240.
- Motor Amp: 4.8.
- Mounting Height Horizontal: 22.
- Mounting Height Vertical: 40.
- Temperature Rise: 68/51.
- FPM Outlet: 1529.
- CFM: 5000.
- Air Throw: 65.
Features
CONSTRUCTION: Heavy Gauge steel cabinet with powder coated finish and control compartment housing a master terminal board. The control compartment allows for access through a hinged and latched door, simplifying wiring, installation, and maintenance.
HEATING ELEMENT: The heating element is a copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow.
OVERHEAT PROTECTION: All units come equipped with manual reset type limit controls to de-energize the heater should an over-temperature situation occur.
FAN AND MOTOR: Single speed, single phase permanently lubricated, thermally protected motors with ball bearings. The fan override purges the unit of residual heat at shutdown.
HEATER STAGING: 60 KW and 70 KW are three stage; 80 KW, 90 KW, and 100 KW are four stage.
SC5100 FACTORY INSTALLED ELECTRONIC STEP CONTROLLER: The optional factory installed step controller is a first on last off sequencer that will cycle the unit heater stages through an optional wall thermostat. Additionally, the step controller can be controlled by any building management system with 4 to 20 MA or 0 - 10 VDC field supplied control signal.
KW 60-70: Height 35.5 inches | Width 30.5 inches | Depth 14.5 inches | Weight 141 Lbs.
KW 80-100: Height 39.5 inches | Width 37.625 inches | Depth 18.5 inches | Weight 202 Lbs.
KW 80-100: Height 39.5 inches | Width 37.625 inches | Depth 18.5 inches | Weight 202 Lbs.
California residents see Prop 65 Warnings
Videos Hide Videos Show Videos
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA