Markel HF2B5105N Fan Forced Electric Unit Heater, 5/3.7 KW, 240/208V/1/3Ph
Markel
$797.76
Usually Ships In 4-5 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Markel-HF2B5105N
- UPC:
- 686334645164
- Weight:
- 27.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Tennessee - Factory Direct
Description:
Markel HF2B5105N Fan Forced Electric Unit Heater Features:
- Catalog Number: 06451602.
- Model Number: HF2B5105N.
- Agency Rating: ETL-CUS.
- KW: 5/3.7.
- BTU: 17.1/12.8.
- Voltage: 240/208.
- Phase: 1 / 3.
- Amp: 20.8/18.1 or 17.1/10.4.
- Control Voltage: 240/208.
- Temperature Rise: 40.
- Air Throw: 12.
- CFM: 400.
- Mounting Height Horizontal: 9.
- Mounting Height Vertical: 9.
- Weight (lbs): 27.
- Model Number: HF2B5105N.
- Agency Rating: ETL-CUS.
- KW: 5/3.7.
- BTU: 17.1/12.8.
- Voltage: 240/208.
- Phase: 1 / 3.
- Amp: 20.8/18.1 or 17.1/10.4.
- Control Voltage: 240/208.
- Temperature Rise: 40.
- Air Throw: 12.
- CFM: 400.
- Mounting Height Horizontal: 9.
- Mounting Height Vertical: 9.
- Weight (lbs): 27.
Features
3.3 KW THROUGH 50 KW SUSPENDED FAN FORCED UNIT HEATERS AVAILABLE IN 1 OR 3 PHASE FOR ALL STANDARD VOLTAGES FROM 208V TO 480V. CAN BE MOUNTED TO PROVIDE HORIZONTAL OR VERTICAL DISCHARGE.
CONSTRUCTION: Heavy 18 gauge welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation and maintenance.
HEATING ELEMENT: Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow.
OVERHEAT PROTECTION: All units come equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models. Totally enclosed, 2-speed, 1-phase, permanently lubricated, thermally protected motors with sleeve bearings on 25 KW - 50 KW models. Fan over-ride purges unit of residual heat at shutdown.
LOUVER ASSEMBLY: Louvers are individually adjustable for directional control of air flow up to 15 degrees from straight horizontal. Optional diffusers available for down flow (vertical discharge) applications.
TEMPERATURE CONTROLS: Optional low voltage and line voltage thermostats available with an adjustable temperature range of 40F to 110F. Units with model numbers ending in CA1 are factory wired for low voltage controls. 25 KW through 50 KW units are designed for two stage heating operation.
INSTALLATION: Unit Heaters can be mounted for horizontal or vertical discharge. Applications up to 6000 ft. See UH Series above 6000 ft.
FEATURES: Made in U.S.A.
FIELD INSTALLED OPTIONS:
- In-unit or wall mounted temperature control thermostats low or line voltage.
- Summer fan switch to operate the fan only.
- Power disconnect switch.
- Heat stratification thermostat.
Videos Hide Videos Show Videos
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA