Fernox 59852 HVAC F3 Commercial Cleaner, 55 Gallon Drum, Treats 10000 Gallons
Fernox
Write a Review
Fernox
Fernox 59852 HVAC F3 Commercial Cleaner, 55 Gallon Drum, Treats 10000 Gallons
Usually Ships In 3-5 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- Fernox-59852
- Weight:
- 180.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Massachusetts
Description:
Fernox HVAC Cleaner F3, 55 Gallon Drum.
Product Code: 59852
Universal cleaner, that can be used for pre-commissioning new installations as well as removing sludge and limescale from existing systems.
Description
A multi-purpose, universal cleaner, HVAC Cleaner F3 can be used for pre-commissioning new installations as well as removing sludge and limescale from existing systems, which can cause boiler damage and system breakdown.
- Cleaner for commercial heating and cooling systems
- Pre-commission cleanser for new installations
- Removes sludge and scale and restores efficiency of existing systems
- Compatible with all metals and materials commonly used in heating and cooling systems
- No neutraliser required
- Suitable for use with all known powerflushing machines
- Non-acidic formula
- Non-hazardous, environmentally friendly
- One 26 gallon bottle treats 500 gallons of water an one 55 gallon bottle treats 10000 gallons of water
- 2.6 gallons : 59701
- 55 gallons : 59852
Physical Properties
Colour: Dark amber
Odour: Faint
Form: Liquid
pH (conc): 7.0
pH (0.5% soln) 7.5 – 7.8
SG: 1.18 at 68°F
Application and Dosage
For optimum results, the entire system should be completely drainable. HVAC Cleaner F3 should be dosed at a concentration of 0.5%. Add via the feed and expansion tank or inject directly into the system via a suitable point (e.g. dosing pot). For pre-commission cleaning, circulate HVAC Cleaner F3 for at least one hour at normal operating temperature. To remove sludge from existing systems, circulate under normal operating conditions, for up to 7 days until acceptable flow around the system has been achieved. Additional/repeat applications of HVAC Cleaner F3 may be necessary if systems are heavily sludged. Drain and flush with cold water until the water is clear and the HVAC Cleaner F3 has been rinsed from the system. HVAC Cleaner F3 will usually be removed after 3 complete flushes. Finally add the appropriate Fernox inhibitor such as HVAC Protector F1 to prevent further corrosion damage and scale deposits.
Packaging, Handling and Storage
Fernox HVAC Cleaner F3 is supplied in 2.6 and 55 gallon drums. Fernox HVAC Cleaner F3 is classified as non-hazardous, but as with all chemicals: Keep out of reach of children. Do not mix with other chemicals. Do not take internally. In case of contact with eyes or skin, rinse immediately with plenty of water.
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA