Bray Commercial
Bray ST2-75-2-12/VAMS24-27 2 Way Ball Valve, 3/4 Inch, 24 VAC / VDC Spring Return Actuator
Bray Commercial
$252.80
Usually Ships In 7-9 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- Bray-ST2-75-2-12/VAMS24-27
- Weight:
- 10.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- Texas - Direct From Bray
Description:
Bray Commercial ST2-75-2-12/VAMS24-27 2 Way Ball Valve, 3/4 Inch with 24 VAC / VDC Spring Return Actuator.
Soft Touch 2 characterized ball valve model ST2-75-2-12 features:
- 3/4 inch.
- 20 mm.
- 11.7 Cv.
- 10.1 Kv
- 2-way flow.
Factory installed actuator model VAMS24-27 features:
- Spring return.
- 24 VAC or 24 VDC.
- Modulating with feedback.
- 1/2 inch NPT conduit.
- Plenum cable.
Soft Touch 2 characterized ball valve model ST2-75-2-12 features:
- 3/4 inch.
- 20 mm.
- 11.7 Cv.
- 10.1 Kv
- 2-way flow.
Factory installed actuator model VAMS24-27 features:
- Spring return.
- 24 VAC or 24 VDC.
- Modulating with feedback.
- 1/2 inch NPT conduit.
- Plenum cable.
- Optional high temperature mounting extension is available.
- Standard NEMA 2, IP54 enclosure.
- Optional NEMA 4, 4X weather shield available.
- Optional auxiliary switch available.
The Bray Commercial SoftTouch 2 (ST2) series characterized ball valves provide accurate and cost effective control of a wide range of equipment in HVAC applications. The ST2 series features a forged brass two piece body with Stainless Steel balls and stems for water temperature up to 284 °F (140 °C) and saturated steam up to 15 psi.
The Amodel® Flow Characterizing Disk maintains equal percentage flow characteristics for optimum temperature control. The blowout-proof stem and mounting flange, combined with an innovative double O-Ring stem seal and self-centering stem bushing design provides quick and easy electric actuator field mounting while ensuring long life and leak-free valve performance.
Graphite reinforced PTFE seats backed with EPDM O-rings significantly reduce operating torque, allowing the use of the most economical actuator to provide the torque required for the application. All valve and actuator assemblies provide 200 psig (1,379 kPa) close-off pressure while ensuring operation after long idle periods. Because of their cost-effective, reliable design, ST2 Series Ball Valves are maintenance free.
The Bray Commercial SoftTouch 2 (ST2) series characterized ball valves provide accurate and cost effective control of a wide range of equipment in HVAC applications. The ST2 series features a forged brass two piece body with Stainless Steel balls and stems for water temperature up to 284 °F (140 °C) and saturated steam up to 15 psi.
The Amodel® Flow Characterizing Disk maintains equal percentage flow characteristics for optimum temperature control. The blowout-proof stem and mounting flange, combined with an innovative double O-Ring stem seal and self-centering stem bushing design provides quick and easy electric actuator field mounting while ensuring long life and leak-free valve performance.
Graphite reinforced PTFE seats backed with EPDM O-rings significantly reduce operating torque, allowing the use of the most economical actuator to provide the torque required for the application. All valve and actuator assemblies provide 200 psig (1,379 kPa) close-off pressure while ensuring operation after long idle periods. Because of their cost-effective, reliable design, ST2 Series Ball Valves are maintenance free.
- Actuator Power:24V
- Flow:2 Way
- Return Position:Spring Return
- Valve Size (In.):0.75
Videos Hide Videos Show Videos
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA