Bray SSM-4-A300-L-X/GA24-562 4 Inch Simple Set Max Adjustable PIC Valve, Low Flow Cartridge, 24 VAC/VDC Actuator
Bray Commercial
(No reviews yet)
Write a Review
Write a Review
Bray Commercial
Bray SSM-4-A300-L-X/GA24-562 4 Inch Simple Set Max Adjustable PIC Valve, Low Flow Cartridge, 24 VAC/VDC Actuator
$4,505.61
Usually Ships In 7-9 Business Days
Free ground shipping to the lower 48 states
- Product ID:
- SSM-4-A300-L-X/GA24-562
- Weight:
- 80.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Texas - Direct From Bray
Description:
Bray SSM-4-A300-L-X/GA24-562 4 Inch Simple Set Max Adjustable PIC Valve, Low Flow Cartridge, 24 VAC/VDC Actuator.
Simple Set Max pressure independent control valve model SSM-4-A300-L-X(GPM) features:
- 4 inch.
Simple Set Max pressure independent control valve model SSM-4-A300-L-X(GPM) features:
- 4 inch.
- 100 mm.
- Flanged connections.
- ANSI 300.
- Low Flow cartridge.
- Minimum flow setting 53.41 GPM.
Factory installed actuator model GA24-562 features:
- 24 VAC / VDC.
- Minimum flow setting 53.41 GPM.
- Maximum flow setting 299.41 GPM.
- Specify your flow setting at order entry, this is digit X in the PIC valve part number.
- Normally open, push down to close.
- 1/4" NPT test ports.
- Stainless steel flow regulation unit.
- Reinforced EPDM diaphragm.
- Stainless steel springs.
- EPDM O-Rings
- For hot water, chilled water or 50/50 glycol solutions.
Factory installed actuator model GA24-562 features:
- 24 VAC / VDC.
- Non-failsafe.
- On/Off, floating and modulating.
- On/Off, floating and modulating.
- IP66 enclosure.
- Manual override with external crank.
The Bray Simple Set Max is a flanged pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SSM Series combines high rangeability control with dynamic balancing into a single compact housing, eliminating material installation and commissioning costs of separate balancing components.
The maximum flow rate is easily set by hand with an adjustment on the top of the valve. The unique design of the Simple Set Max provides full stroke of the control element, even when the flow rate setting is a small percentage of the maximum flow capacity of the valve.
Simple Set Max valves provide a continuous flow rate at any fixed position of the valve irrespective of inlet pressure change. This prevents overflow at any load condition, which contributes to optimal coil performance and primary equipment efficiency.
The Bray GA(S) series is a direct mount line of linear motor actuators to be used primarily on PIC and globe valves. The patented drive-valve coupling allows the drive to be connected to the valve automatically as soon as the power is applied to the actuator. An external crank handle enables the desired position to be set manually as well. Microprocessor technology enables the actuator to identify the functions required and to adapt itself automatically to the control valve properties.
These actuators operate on 24V AC or DC, and all input signals- 0-10V or 4-20mA modulating output, or On/Off (2-point) or Floating (3-point) control. The actuator automatically detects the control signal applied via a 2 LED display. These actuators operate both 2 and 3-way valves and are available in non-spring return (GA) and spring return (GAS) versions.
The GA(S) series is bi-directional, selectable via screw terminals.
- Actuator Power:24V
- Valve Size (In.):4
Videos Hide Videos Show Videos
Related Units, Accessories, And OEM Replacement Parts
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA