Berko QFF4807 Ceiling Heater, 4.8/3.6KW, 277/240V/1Ph
Berko
(No reviews yet)
Write a Review
Write a Review
Berko
Berko QFF4807 Ceiling Heater, 4.8/3.6KW, 277/240V/1Ph
$742.76
Usually Ships In 2-3 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Berko-QFF4807
- UPC:
- 685360059198
- Weight:
- 23.00 (Lbs.)
- Ships By:
- Free Ground
- Ships From:
- South Carolina - Factory Direct
Description:
Berko QFF4807 Ceiling Heater, 4,800/3,600W, 277/240V 1PH 17.3/15.0A
When wall and floor space is limited, electric ceiling heaters are your answer. Mounted flat or recessed to the ceiling, these heaters are ideal for conference rooms, waiting areas, bathrooms, and lobbies.
Berko QFF Series Features:
- Anywhere it makes sense to keep your heating solution out of the way and out of reach, choose these fan-forced ceiling heaters. They work well as a comfort solution for hallways, lobbies, restrooms or detention environments.
- Anywhere it makes sense to keep your heating solution out of the way and out of reach, choose these fan-forced ceiling heaters. They work well as a comfort solution for hallways, lobbies, restrooms or detention environments.
- Dependable and quiet.
- Navajo White finish.
- 14 gauge louver cover with tamper resistant screws and 1/4 inch mesh screen.
- QFF Models from 1500 to 4800 Watts (5,120 to 16,382 BTU/hr.).
- Room temperature is controlled by a remote wall or built-in thermostat accessory.
- Ceiling mounted either recessed, surface, or in a T-bar application.
- 14 gauge louver cover with tamper resistant screws and 1/4 inch mesh screen.
- QFF Models from 1500 to 4800 Watts (5,120 to 16,382 BTU/hr.).
- Room temperature is controlled by a remote wall or built-in thermostat accessory.
- Ceiling mounted either recessed, surface, or in a T-bar application.
- Unit is designed for recessed installation, but is easily adapted for surface mounting with the use of the optional surface mounting frame.
- Rugged steel fins are copper-brazed to the low watt density, steel sheathed, tubular heating elements which are arranged in a uniform pattern.
- Thermal cutout shuts off the heater in the event of overheating.
- Fan delay starts fan after heating element is warm and continues to run fan after heating element shuts off to remove residual heat.
- Dual wattage units are factory wired at higher wattage and can be converted to lower wattage by removing a jumper.
- Rugged steel fins are copper-brazed to the low watt density, steel sheathed, tubular heating elements which are arranged in a uniform pattern.
- Thermal cutout shuts off the heater in the event of overheating.
- Fan delay starts fan after heating element is warm and continues to run fan after heating element shuts off to remove residual heat.
- Dual wattage units are factory wired at higher wattage and can be converted to lower wattage by removing a jumper.
- Grille: 15-3/4” W x 19-1/8” L x 1” D.
- Back Box: 14-3/8” W x 18-1/4” L.
NOTE:
- When using wall thermostat, separate thermostat wiring is required.
Related Units, Accessories, And OEM Replacement Parts
Berko
Berko FRC4827FNW Electric Wall Heater, 4,800W, 277/240V/1Ph, White
$751.63
Add to Cart
The item has been added
Berko
Berko FRC4027FNW Electric Wall Heater, 4,000W, 277/240V/1Ph, White
$637.65
Add to Cart
The item has been added
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA