Description:
Titan Flow Control CV31DSB0600 Features:
- Wafer Type.
- 6 Inch Check Valve.
- Body: Ductile Iron A536.
- Disc: Stainless Steel.
- Disc Seat: Buna-N.
Additional Features
Economical Design:
Low weight and short laying length produce savings in initial cost, space requirements, and installation when compared to full-body, swing-type valves.
Minimal Head Loss:
Head loss is minimized by providing a short, straight and virtually unobstructed flow path. Additionally, the spring-loaded disc is designed with very low cracking pressure which reduces the amount of energy required to open the valve.
Quick Closure to Reduce Water Hammer:
Shut-off is achieved via the fully automatic, spring-assisted disc that closes near zero flow velocity, the lightweight, single disc design creates a positive shutoff prior to flow reversal which helps to keep surges to a minimum.
Durable, High Quality Design:
The CV31's ductile iron body maintains the anti-corrosive properties of cast iron white achieving a yield strength comparable to carbon steel. Ductile iron also offers higher pressure/temperature ratings than cast iron in teh same pressure class. The CV31 also features anti-corrosive, stainless steel trim (disc, spring, shaft) as standard.
Resilient Soft Seats:
Field replacement, resilient soft seats (Buna-N O-Ring) coupled with precision machined sealing surfaces help to ensure a bubble tight seal that meets or exceeds API 598 test requirements.