Modine HER50C3401 Electric Heater, 5 KW, 600V 3Ph
Modine
$1,851.98
Usually Ships In 8-9 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Modine-HER50C3401
- Weight:
- 60.01 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Virginia - Direct From Modine
Description:
Modine HER50C3501 Features:
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.
- FP 32043.
- Factory assembled and wired for a specific power supply - no field modifications required.
- Heavy duty steel safety fan guard.
- Totally enclosed, thermally protected fan motor.
- Automatic re-setting overheat control.
- Lightweight balanced fan blade.
- Adjustable air deflector blades.
- Steel casing with tough baked on finish.
- Nickel chromium wire elements enclosed in powder filled aluminum coated steel tubes.
- Built in terminal blocks and contactors.
- Drop down service panel for easy wiring connections.
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.
- FP 32043.
- Factory assembled and wired for a specific power supply - no field modifications required.
- Heavy duty steel safety fan guard.
- Totally enclosed, thermally protected fan motor.
- Automatic re-setting overheat control.
- Lightweight balanced fan blade.
- Adjustable air deflector blades.
- Steel casing with tough baked on finish.
- Nickel chromium wire elements enclosed in powder filled aluminum coated steel tubes.
- Built in terminal blocks and contactors.
- Drop down service panel for easy wiring connections.
- Made in the USA.
- Deflector blades can be adjusted to lengthen or shorten heat throw as well as direct heated air up or down.
- Terminal and junction boxes provide easy access to heating-element terminals, overheat control switch, the unit’s power supply, and control connections.
- Motors are enclosed and protected from thermal overload.
- Fans are statically and dynamically balanced.
- An automatic re-setting overheat control interrupts the power supply to the heating elements in the event of overheating. This control resets once the element is at a safe temperature.
- Fan and motor assemblies are exposed and can be removed without lowering the unit heater.
- Hinged bottom allows for easy access to the access to the controls.
- Deflector blades can be adjusted to lengthen or shorten heat throw as well as direct heated air up or down.
- Terminal and junction boxes provide easy access to heating-element terminals, overheat control switch, the unit’s power supply, and control connections.
- Motors are enclosed and protected from thermal overload.
- Fans are statically and dynamically balanced.
- An automatic re-setting overheat control interrupts the power supply to the heating elements in the event of overheating. This control resets once the element is at a safe temperature.
- Fan and motor assemblies are exposed and can be removed without lowering the unit heater.
- Hinged bottom allows for easy access to the access to the controls.
Recommended for use in buildings with low ceilings are few obstructions, the horizontal electric unit heaters models are equipped with horizontal air deflector blades to adjust airflow either up or down. The HER is normally placed around the perimeter of the building so that the air stream from each heater “wipes” the wall to produce a blanket of warm air along the building’s outside walls where heat loss is greatest.
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA