Macurco 30-0021-1110-1 Cal-Kit 2 Calibration Kit - Includes: Calibration Case, 2 ft Tygon Tubing, Cal Hood Pack, 0.2 LPM Regulator (M)

Description:

Macurco 30-0021-1110-1 Cal-Kit 2 Calibration Kit - Includes: Calibration Case, 2 ft Tygon Tubing, Cal Hood Pack, 0.2 LPM Regulator (M) Features:
- Calibration Kit.
- Dimensions: 18 x 13-1/2 x 6 in.
- For Use With CX-6, CX-12, CM-6, CM-12, TX-ND-6, TX-ND-12, TX-6-HS and TX-12-HS Gas Detectors.
- Includes: Calibration Case, 2 ft Tygon Tubing, Cal Hood Pack, 0.2 LPM Regulator (M).
- Detects: Carbon Monoxide, Hydrogen, Methane, Propane.
- Replacing CX-FCK, ND1-FCK, ND-FCK and HS-FCK.
- Gases ordered separately: CO-200PPM-AL, NO2-5PPM-AL or H2S Gas 25PPM.

Additional Features
The Macurco 6 & 12 Series detection family requires routine testing and calibration. Each detector has a corresponding testing/calibration kit to test and calibrate the detectors in the field. Sensors may drift over time, so it is recommended to have a maintenance plan to ensure detectors responding to gas appropriately. A gas calibration is the process of exposing a sensor to a target gas at a specific concentration and then adjusting the gas detector to read that gas concentration properly. Macurco recommends testing and calibration at a least once per year at a minimum but depending on the application and risk potential of the application a greater frequency might be needed. Check with local authorities for any specific local regulations.