The Type M+MG2 Commercial Draft Control models are a series of compact, rugged, heavy-duty controls for use on large residential, commercial and industrial applications. The M+MG2 Draft Control provides precise draft regulators for solid fuels, oil, gas, or appliances requiring only the simplest, on-the-job adjustments depending on which fuel is to be utilized.
INSTALLATION OPTIONS
In a gas installation, the M+MG2 is specified instead of a draft hood to give the appliance the assistance of the chimney. In a duel fuel oil/gas or a gas-fired only application, use the M+MG2 as a double-acting draft control with the optional Field Thermal Switch accessory. Use the M+MG2 as a single-acting draft control for oil or solid fuel applications.
For any installation with 10″ or larger diameter vent pipe, specify the Field Controls standard M+MG2 Draft Control. This unit that can be adapted to any fuel. The moving part (gate) rests on a long, thin, stainless steel knife edge which, in turn, is supported by self-aligning and self-cleaning bearings. When the heavy gauge gate moves, only the knife edge rests on the bearing for minimum friction and maximum sensitivity to draft changes.
The M+MG2 Commercial Draft Controls should be installed by a licensed contractor.
