Ecocirc Wireless Potable Hot Water Pump Kit (3/4" MPT x FPT)

Description:

The ecocirc wireless is a potable hot water recirculation kit (a pump and valve combination) for instant supply of hot water supply throughout the entire house. The ecocirc pump is installed on the supply side of the hot water source and the mixing valve under the sink farthest away from the hot water source. The pump and valve are in constant wireless communication. The desired water temperature at the valve is set directly on the pump with the thermostat dial. The water temperature is constantly checked by the valve and the temperature values are sent to the pump. At approximately 5°F below the desired water temperature, the pump will begin to circulate hot water. This circulation will open the valve for hot water to cross into the cold water line, which creates a return loop back to the hot water source. When the desired temperature is reached, the pump will stop circulating. This is to prevent continuous circulation. Features & Benefits: ecocirc series pump with energy efficient ECM based permanent magnet motor Operates on as little as 20 watts Operated via wireless communication Temperature and Timer controlled Optional Push Button Start Valve operates using two AA batteries No electrical outlet required under the sink No recirculation line needed