Danfoss 023Z5033 Liquid Line Filter Drier 5/8"

Description:

Danfoss 023Z5033 Liquid Line Filter Drier 5/8" Eliminator® liquid line filter driers protect refrigeration and air-conditioning systems frommoisture, acids, and solid particles. With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive impurities. There are two types of Eliminator® cores. Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina. All Eliminator® driers have a solid core with binding material held to an absolute minimum. Core selection is primarily based on the refrigerant oil used in the system. Eliminator® type DML, with a solid core of 100% Molecular Sieve, is optimized for use with HFC refrigerants and polyolester (POE) or polyalkyl glycol (PAG) oils. Type DML driers are designed for applications requiring high water adsorption, and can be used with any manufacturer’s compressor. Because type DML driers contain no activated alumina, oil additives will not be depleted. Eliminator® type DCL, with a solid core of 80% Molecular Sieve and 20% activated alumina, is the drier of choice for systems with HCFC and CFC refrigerants and mineral or alkyl benzene oils. Type DCL driers are particularly suited for systems that operate at high condensing temperatures and require high drying capacity. Features: The Core Type DML 100% 3Å Molecular Sieve core. High drying capacity minimizing the risk of acid formation (hydrolysis). Optimized for HFC refrigerants (R134a, R404A,R410A, etc.) with POE or PAG oils. Compatible with R22. Will not deplete oil additives. Type DCL 80% 3Å Molecular Sieve with 20% activated alumina. Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity. Optimized for CFC and HCFC refrigerants (R22, R502, etc.) with mineral or alkyl benzene oils. Compatible with HFC’s and refrigerant blends The Shell UL approved for MWP up to 42 bar (610 psig) Available with solder (copper) and flare connections. Compact 3 cubic inches drier ideal for refrigeration and air conditioning units. Corrosion resistant powder-painted fi nish. Can be used in all environments including marine applications. Allows installation with any orientation provided the arrow is in the flow direction. Available in sizes from 3 to 75 cubic inches. The Filter 25 μm (0.001 in.) fi lter provides high retention with minimal pressure drop. Thermally stable up to 120°C (250°F)