Chromalox SDRA-48-93 Portable High Temperature Blower Heater 48.0KW 163,824 Btu/Hr 600V 3PH 47.3A PCN 295718
Chromalox
(No reviews yet)
Write a Review
Write a Review
Chromalox
Chromalox SDRA-48-93 Portable High Temperature Blower Heater 48.0KW 163,824 Btu/Hr 600V 3PH 47.3A PCN 295718
$9,300.36
Usually Ships In 2-3 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Chromalox-SDRA-48-93
- Weight:
- 160.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Tennessee - Direct From Chromalox
Description:
Chromalox SDRA Features:
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.
Heating Cylinder:
A structural frame consisting of 2 spun steel rings and 2 formed steel channels support a 20 gauge steel cylinder phosphate coated for corrosion resistance, and finished in red polyester powder coat paint. The cylinder contains patented metal sheath Fintube heating elements that include industrial grade .475 inch diameter steel sheath tubular heaters with furnace brazed steel fins for maximum heat transfer. The elements are firmly attached to a robust steel assembly with steel bulkhead threaded fittings.
Fan Section:
The fan assembly includes a 16 inch tubeaxial fan designed for industrial use along with a streamlined belt tunnel that isolates the motor, drives, and bearings from the airstream. The fan blades are precision balanced and made of spark resistant aluminum. Bearings are permanently lubricated ball bearing type. Safety belt guards are supplied to protect operating personnel. Motor is drip proof, 1HP, 3 phase, 1,725 rpm and operates on line voltage. Fan speed can be varied from 1,500 to 2,300 RPM by adjusting the pulleys.
Controls:
Two adjustable thermostats (60 to 180 degrees F) are located on the heater cylinder to allow the inlet and outlet temperatures to be adjusted for single pass heating or recirculated air temperature control. Power is switched by magnetic contactor(s) located in a gasketed NEMA 4 enclosure along with the motor starter, control voltage transformer, heater power fusing, fan only toggle switch, and pilot lights for power and heater.
Safety Guards:
Front and rear grills are 10 gauge finished in black polyester powder coat and are designed to meet OSHA safety requirements.
Applications:
- Aircraft Cabin Heating
- Plant Maintenance
- Construction Sites
- Curing Plaster And Concrete
- Warming Workers
- Drying Out After Floods
- Insect Control
- Thawing Frozen Pipes
For best results, use in an enclosed area with ceiling heights below 15 feet.
Advantages:
- No Fumes Or Annoying Smell
- Safer, No Open Flame
- Safe To Operate In Unattended Areas
- No Moisture And Fumes Added To The Air - Burning Oil And Gas Fuels Adds Moisture And Fumes To The Air
- Minimum Maintenance
- No Fuel To Store
- Long Horizontal Air Throw
- Easy Installation
- Fan Only For Summer Cooling
- Long Life Industrial Finned Tubular Heating Elements
- High Limit Thermal Cut-out Switch
Heating Cylinder:
A structural frame consisting of 2 spun steel rings and 2 formed steel channels support a 20 gauge steel cylinder phosphate coated for corrosion resistance, and finished in red polyester powder coat paint. The cylinder contains patented metal sheath Fintube heating elements that include industrial grade .475 inch diameter steel sheath tubular heaters with furnace brazed steel fins for maximum heat transfer. The elements are firmly attached to a robust steel assembly with steel bulkhead threaded fittings.
Fan Section:
The fan assembly includes a 16 inch tubeaxial fan designed for industrial use along with a streamlined belt tunnel that isolates the motor, drives, and bearings from the airstream. The fan blades are precision balanced and made of spark resistant aluminum. Bearings are permanently lubricated ball bearing type. Safety belt guards are supplied to protect operating personnel. Motor is drip proof, 1HP, 3 phase, 1,725 rpm and operates on line voltage. Fan speed can be varied from 1,500 to 2,300 RPM by adjusting the pulleys.
Controls:
Two adjustable thermostats (60 to 180 degrees F) are located on the heater cylinder to allow the inlet and outlet temperatures to be adjusted for single pass heating or recirculated air temperature control. Power is switched by magnetic contactor(s) located in a gasketed NEMA 4 enclosure along with the motor starter, control voltage transformer, heater power fusing, fan only toggle switch, and pilot lights for power and heater.
Safety Guards:
Front and rear grills are 10 gauge finished in black polyester powder coat and are designed to meet OSHA safety requirements.
Applications:
- Aircraft Cabin Heating
- Plant Maintenance
- Construction Sites
- Curing Plaster And Concrete
- Warming Workers
- Drying Out After Floods
- Insect Control
- Thawing Frozen Pipes
For best results, use in an enclosed area with ceiling heights below 15 feet.
Advantages:
- No Fumes Or Annoying Smell
- Safer, No Open Flame
- Safe To Operate In Unattended Areas
- No Moisture And Fumes Added To The Air - Burning Oil And Gas Fuels Adds Moisture And Fumes To The Air
- Minimum Maintenance
- No Fuel To Store
- Long Horizontal Air Throw
- Easy Installation
- Fan Only For Summer Cooling
- Long Life Industrial Finned Tubular Heating Elements
- High Limit Thermal Cut-out Switch
Related Units, Accessories, And OEM Replacement Parts
from our fans
"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"
CHRYSTAL FROM FLORIDA