Bray MKL2-C200/70-1800SV 2 Way High Performance Butterfly Valve, Seat Retainer Upstream, 20 Inch, 120V Non Spring Return Actuator

(No reviews yet) Write a Review
$17,817.81

Usually Ships In 7-9 Business Days

Free ground shipping to the lower 48 states

Product ID:
Bray-MKL2-C200/70-1800SV-US
Weight:
850.00 (Lbs.)
Ships By:
Truck, Curbside, Back Of Truck
Ships From:
Texas - Direct From Bray

choose options:

Frequently Bought Together

Please choose options for all selected products

  • Choose Options

Description:

Bray MKL2-C200/70-1800SV 2 Way High Performance Butterfly Valve, Seat Retainer Upstream, 20 Inch, 120V Non Spring Return Actuator.

High performance butterfly valve model MKL2-C200 features:
- Seat retainer upstream.
- 20 inch.
- 500 mm.
- 200 PSI close-off.
- 90 degree 13500 Cv.
- 60 degree 6500 Cv.
- 2-way flow.
- Normally closed.
- ANSI class 150.
- Double offset stem / disc design.
- Blow out proof stem.
- Energized RTFE seat.
- Pressure assisted, but not pressure dependent design.
- Adjustable PTFE packing.
- Dead end rating equal to nominal pressure rating.
- Carbon steel body.
- 316 stainless steel disc.
- 17-4 stainless steel stem.
- For use with hot water, chilled water, condenser water and steam.

Factory installed actuator model 70-1800SV features:
- 120 VAC.
- Modulating with Servo NXT technology.
- One touch menu driven push button selection of all settings.
- NEMA type 4, 4x and IP65 enclosure.
- High visibility beacon position indicator.
- Manual declutchable override hand wheel, pull to engage, push to disengage.
- Auxiliary switch.
- ASTM B85 pressure die cast aluminum housing with polyester powder coat.
- Stainless steel exposed fasteners.
- 2 conduit connections.
- Optional 5 watt PTC style heater.

Bray’s MK Series High Performance Butterfly Valves are available in ANSI Class 150 and 300. Bray's high performance butterfly series is used in Building Automation, Temperature Controls, HVAC 2-Way and 3-Way Assemblies, Chilled Water, Hot Water, Steam, and Special Applications. The Bray/McCannalok MK Series high performance butterfly valves set the quality and design standard by which all other high performance valves are measured. The MK Series is ideally suited to high pressure, high temperature, and high cycle HVAC applications as well as mission critical HVAC applications.

Available in ANSI Class 150 ratings, both 2-way and 3-way, and ANSI Class 300 ratings in 2-way configurations, Bray’s MK Series valves are provided with a wide variety of direct mount Bray electric and pneumatic actuators and accessories. All valves are tested for bubble-tight closeoff to API 598 standards at maximum rated differential pressure. 

Bray Series 70 industrial actuators have become the industry standard in the Commercial HVAC industry due to it’s compact, reliable design that mounts directly to Bray’s industry leading butterfly and industrial ball valves without the need for brackets and linkages. Available in torque outputs from 600 to 18,000 lb.-in. (68 to 2033 NM), 24V and 120VAC, On/Off and Modulating units all in NEMA 4x and IP65 rated housings. These actuators are ideal for use on valves for Chillers, Cooling Towers, Boilers, Heat Exchangers and other outdoor applications. Furthermore, its advanced electronics assure reliable compatibility with virtually any analog control signal used in today’s building automation and temperature control system.

The Series 70 Servo NXT provides precise modulating control of valve position:
- Single Finger Technology (SFT) menu driven, pushbutton, programming with LED confirmation of all settings.
- Optical isolation of all inputs/outputs.
- Input Control - 4-20 mA or 0-10 VDC or 0-5 VDC or 2-10 VD.
- Position Feedback - 4-20 mA or 0-10 VDC or 0-5 VDC.
- Auto Calibrating.
- Fail Position.
- Speed Control.
- Manual Mode.
- On board signal generator to simplify field set up.
- Fault display simplifies troubleshooting.
- Stall detection- Eliminates mechanical damage in case of obstruction or bad switch settings.
- Provides interoperability with all controllers.
- Earth ground tolerant.
- Allows for parallel operation.

There is no better choice for building automation!
  • Actuator Power:120V
  • Flow:2 Way
  • Return Position:Non-Spring Return
  • Valve Size (In.):20

Videos Hide Videos Show Videos

from our fans

"We have been ordering parts from NorthStock and have been very pleased with the service. The availability shown on the website has always been actual in-stock items, product has always shipped as promised. Knowing you have a vendor you can depend on is key, NorthStock is our first point of contact. Customer service on a level that you do not see very often this day and age. Thanks NorthStock!"

CHRYSTAL FROM FLORIDA
  • "This company cares about their products but also cares about customer satisfaction. I will continue to order from them for all my needs."

    pat from pennsylvania
  • “I ordered a part to be shipped to Arkansas. NorthStock had the best price that I could find. They shipped the part fast and it (fan motor) runs quieter than when new.”

    tim from arkansas
  • “Excellent customer service and quicker than expected delivery of a hard to source part. Highly recommended.”

    sean from massachusetts
  • “Had exactly what I needed in stock. Ordered on a Wednesday and it arrived Friday. Could not ask for better service. Fast Shipping and a very nice website!”

    scott from maryland
  • “Fast shipping and excellent customer service. Will continue to do business with them.”

    andrew from missouri
Top