Fostoria HR-F3-12.2 Hot Room Heater, 12.2KW, 208V/3Ph
Fostoria
(No reviews yet)
Write a Review
Write a Review
Fostoria
Fostoria HR-F3-12.2 Hot Room Heater, 12.2KW, 208V/3Ph
$9,576.00
Usually Ships In 4-5 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Fostoria-HR-F3-12.2
- UPC:
- 686334396752
- Weight:
- 80.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Tennessee - Factory Direct
Description:
Fostoria HR-F3-12.2 Hot Room Heater, 12.2KW, 208V/3Ph Features:
- High-temperature rated, ball bearing motor; forward curved centrifugal blower; standard with airflow switch, temperature limit controls (manual and automatic resets), and lockable disconnect switch with fuse block.
- Galvannealed 20 Gauge heavy-duty metal housing.
- Totally enclosed, finned tubular stainless steel heating elements, provide the benefits of closer temperature regulation, less chance of shock hazards, less susceptibility for shorting, easy service, and will better withstand physical abuse
- Capability of mounting for in-room use, or mounting at an external wall/ceiling, with the heat inlet/outlet ducted to/from the room. 1 inch duct flanges at inlet and discharge ends are standard, to provide for ducting on the unit.
- All models listed are designed for permanent mounting and hard wiring.
- A typical hot room should be totally enclosed, with provisions made to keep air from escaping, other than the air being ducted thru the heater itself when the unit is mounted outside the room. As always, insulation should be considered for walls and ceiling, to maximize energy efficiency and heater performace.
- High-temperature rated, ball bearing motor; forward curved centrifugal blower; standard with airflow switch, temperature limit controls (manual and automatic resets), and lockable disconnect switch with fuse block.
- Galvannealed 20 Gauge heavy-duty metal housing.
- Totally enclosed, finned tubular stainless steel heating elements, provide the benefits of closer temperature regulation, less chance of shock hazards, less susceptibility for shorting, easy service, and will better withstand physical abuse
- Capability of mounting for in-room use, or mounting at an external wall/ceiling, with the heat inlet/outlet ducted to/from the room. 1 inch duct flanges at inlet and discharge ends are standard, to provide for ducting on the unit.
- All models listed are designed for permanent mounting and hard wiring.
- A typical hot room should be totally enclosed, with provisions made to keep air from escaping, other than the air being ducted thru the heater itself when the unit is mounted outside the room. As always, insulation should be considered for walls and ceiling, to maximize energy efficiency and heater performace.
Specifications:
Catalog Number: 03967502
Model Number: HR-F3-12.2
Voltage Phase: 208/3
KW: 12.2
Amp: 35
Height: 18
Width: 22
Length: 36
Motor Rating HP: 1/3
CFM: 1800
Temperature Rise: 23.4
Model Number: HR-F3-12.2
Voltage Phase: 208/3
KW: 12.2
Amp: 35
Height: 18
Width: 22
Length: 36
Motor Rating HP: 1/3
CFM: 1800
Temperature Rise: 23.4
Related Units, Accessories, And OEM Replacement Parts
