Zelio Supply Control Relay, 3 Phase (5A, 220-480V)

Description:

Zelio Supply Control Relay, 3 Phase (5A, 220-480V) Specifications: Range of Product: Zelio Control Product or Component Type: Modular Measurement and Control Relays Relay Type: Multifunction Control Relay Product Specific Application: For 3-Phase Supply Relay Monitored Parameters: Undervoltage and Overvoltage in Window Mode, Phase Sequence, Phase Failure Detection, Asymmetry Time Delay: Adjustable 0.1...10 s, +/- 10 % of the Full Scale Value Switching Capacity in VA: 1250 VA Measurement Range: 208...480 V voltage AC Reset Time: 1500 ms at 480 V Maximum Switching Voltage: 250 V AC, 250 V DC Minimum Switching Current: 10 mA 5 V DC Maximum Switching Current: 5 A AC, 5 A DC Supply Voltage Limits: 194…528 V AC, 3 Phase Control Circuit Voltage Limits: - 12 % + 10 % Un Power Consumption in VA: 0…22 VA 400 V AC 50 Hz Voltage Detection Threshold: < 194 V Control Circuit Frequency: 50...60 Hz +/- 10 % Output Contacts: 2 C/O Nominal Output Current: 5 A Measurement Voltage Limits: 176…528 V AC Hysteresis: 2 % Delay at Power Up: 650 ms Maximum Measuring Cycle: 140 ms Measurement Cycle as True rms Value Threshold Adjustment Voltage: -20...-2 % in the range 380...480 V AC, 2...20 % of Un selected, -12...-2 % in the range 220 V AC, +2...+20 % in the range 220...440 V AC, +2...+10 % in the range 480 V AC Voltage Range: 220...480 V Phase to Phase Adjustment of Asymmetry Threshold: 5...15 % of Un Selected Repeat Accuracy: 0.3 % Time Delay, 0.5 % Input and Measurement Circuit Measurement Error: < 1 % over the Whole Range with Voltage Variation, 0.05 %/°C with Temperature Variation Response Time: < 200 ms in the Event of a Fault) Marking: CE Overvoltage Category: III IEC 60664-1 Insulation Resistance: > 500 MOhm 500 V DC IEC 60255-5, > 500 MOhm 500 V DC IEC 60664-1 [Ui] Rated Insulation Voltage: 400 V IEC 60664-1 Supply Frequency: 50/60 Hz +/- 10 % Operating Position: Any Position Without Connections - Terminals: Screw Terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) Solid without Cable End, Screw Terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) Solid without Cable End, Screw Terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) Flexible with Cable End, Screw Terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) Flexible with Cable End Tightening Torque: 5.31…8.85 lbf.in (0.6…1 N.m) IEC 60947-1 Housing Material: Self-Extinguishing Plastic Local Signalling: Power ON LED green, Relay ON LED yellow, Fault LED yellow Mounting Support: 35 mm Symmetrical DIN Rail EN/IEC 60715 Electrical Durability: 100000 Cycles Mechanical Durability: 30000000 Cycles Operating Rate: <= 360 Operations/Hour Full Load Utilisation Category: AC-12 IEC 60947-5-1, AC-13 IEC 60947-5-1, AC-14 IEC 60947-5-1, AC-15 IEC 60947-5-1, DC-12 IEC 60947-5-1, DC-13 IEC 60947-5-1 Safety Reliability Data: MTTFd = 399.5 Years, B10d = 360000 Electromagnetic Compatibility: Emission Standard for Industrial Environments EN/IEC 61000-6-4, Emission Standard for Residential, Commercial and Light-Industrial Environments EN/IEC 61000-6-3 Immunity for industrial environments EN/IEC 61000-6-2 Standards: EN/IEC 60255-1 Directives: 89/336/EEC - Electromagnetic Compatibility 73/23/EEC - Low Voltage Directive Ambient Air Temperature for Storage: -40…158 °F (-40…70 °C) Ambient Air Temperature for Operation: -4…122 °F (-20…50 °C) Relative Humidity: 95 % 131 °F (55 °C) IEC 60068-2-30 Vibration Resistance: 0.35 mm 5…57.6 Hz)IEC 60068-2-6, 1 gn 57.6…150 Hz)IEC 60255-21-1 Shock Resistance: 15 gn 11 ms IEC 60255-21-1 IP Degree of Protection: IP20 IEC 60529 terminals, IP30 IEC 60529 Casing) Pollution Degree: 3 IEC 60664-1 Dielectric Test Voltage: 2 kV AC 50 Hz, 1 min Non-Dissipating Shock Wave: 4 kV Warranty: 18 Months