Chromalox SDRA-60-43 Portable High Temperature Blower Heater 60.0KW 480V 3PH 73.3A PCN 295726

(No reviews yet) Write a Review
$9,354.23

Usually Ships In 3-4 Weeks

Free ground shipping to the lower 48 states

Product ID:
Chromalox-SDRA-60-43
Weight:
170.00 (Lbs.)
Ships By:
Truck, Curbside, Back Of Truck
Ships From:
Tennessee - Direct From Chromalox

choose options:

Frequently Bought Together

Please choose options for all selected products

  • Choose Options

Description:

Chromalox SDRA Features:
 
- Not cancelable, not returnable. Before purchasing please double check to confirm this item is correct for your application.

Heating Cylinder:
A structural frame consisting of 2 spun steel rings and 2 formed steel channels support a 20 gauge steel cylinder phosphate coated for corrosion resistance, and finished in red polyester powder coat paint. The cylinder contains patented metal sheath Fintube heating elements that include industrial grade .475 inch diameter steel sheath tubular heaters with furnace brazed steel fins for maximum heat transfer. The elements are firmly attached to a robust steel assembly with steel bulkhead threaded fittings.

Fan Section:
The fan assembly includes a 16 inch tubeaxial fan designed for industrial use along with a streamlined belt tunnel that isolates the motor, drives, and bearings from the airstream. The fan blades are precision balanced and made of spark resistant aluminum. Bearings are permanently lubricated ball bearing type. Safety belt guards are supplied to protect operating personnel. Motor is drip proof, 1HP, 3 phase, 1,725 rpm and operates on line voltage. Fan speed can be varied from 1,500 to 2,300 RPM by adjusting the pulleys.

Controls:
Two adjustable thermostats (60 to 180 degrees F) are located on the heater cylinder to allow the inlet and outlet temperatures to be adjusted for single pass heating or recirculated air temperature control. Power is switched by magnetic contactor(s) located in a gasketed NEMA 4 enclosure along with the motor starter, control voltage transformer, heater power fusing, fan only toggle switch, and pilot lights for power and heater.

Safety Guards:
Front and rear grills are 10 gauge finished in black polyester powder coat and are designed to meet OSHA safety requirements.

Applications:
- Aircraft Cabin Heating
- Plant Maintenance
- Construction Sites
- Curing Plaster And Concrete
- Warming Workers
- Drying Out After Floods
- Insect Control
- Thawing Frozen Pipes

For best results, use in an enclosed area with ceiling heights below 15 feet.

Advantages:
- No Fumes Or Annoying Smell
- Safer, No Open Flame
- Safe To Operate In Unattended Areas
- No Moisture And Fumes Added To The Air - Burning Oil And Gas Fuels Adds Moisture And Fumes To The Air
- Minimum Maintenance
- No Fuel To Store
- Long Horizontal Air Throw
- Easy Installation
- Fan Only For Summer Cooling
- Long Life Industrial Finned Tubular Heating Elements
- High Limit Thermal Cut-out Switch
Top