Macurco 70-2900-0012-2 BRS-485 1.5 W 12 to 24 VAC/VDC Multi-Protocol Adapter

Description:

Macurco 70-2900-0012-2 BRS-485 1.5 W 12 to 24 VAC/VDC Multi-Protocol Adapter Features:
- Multi-protocol Adapter.
- 1.5 W Power Rating.
- 12 to 24 VAC/VDC Voltage Rating.
- Operating Environment: 0 to 125 deg F, 10 to 90% RH Non-Condensing.
- Plugs/Terminals Connection.
- Blue.
- Dimensions: 3-1/2 x 2 x 1-3/4 in.
- For Use With Macurco 6-Series Gas Detectors.
- Interfaces the detector power and 4-20 mA output lines with a mounted connector.
- Monitors sensor type, gas level and trouble status communications from any of the Macurco 6-Series detectors.
- Operates as Modbus RTU Slave, BACnet MSTP Server, Metasys N2 Slave or Siemens FLN Slave.
- Communication is on a serial line with a ""Two-Wire"" electrical interface in accordance with EIA/TIA-485 standard using RTU Transmission Mode.
- Commercial type enclosure to protect and support the electronics.
- Tricolor LED indicates power, test and communication status.
- Mounts behind the detector inside of a standard 4 x 4 in electrical box.
- Held in place on the back of the 6-Series detector with a single screw.
- Mounting screw and screwdriver included.

Additional Features
The Macurco BRS-485 Adapter is an accessory used to convert the 4-20mA analog signal from Macurco 6-Series type detectors to a digital signal for use with multipoint addressable systems. This device simply connects to the back of the detector and a single screw fastens it in place. The BRS-485 accepts the 4-20mA output and is powered from the same connection as the detector. It can interface with Building Automation Systems, control panels or other control devices that accept Modbus, BACnet, Metasys and Siemens communication protocol.