Modine POR185B0101 Oil Fired Unit Heater, 185000 BTUH, 115V
Modine
$6,708.00
Usually Ships In 4-6 Weeks
Free ground shipping to the lower 48 states
- Product ID:
- Modine-POR185B0101
- UPC:
- 046629320372
- Weight:
- 398.00 (Lbs.)
- Ships By:
- Truck, Curbside, Back Of Truck
- Ships From:
- Virginia - Direct From Modine
Description:
Modine POR185B0101 Oil Fired Unit Heater Features:
- FP 32037.
- Completely factory assembled, pre-wired, fire tested, and UL listed to utilize fuel oil grade No. 1 or No. 2.
- Quick installation using a 115 volt, 60 Hertz, single-phase power supply and a 24 volt wall mounted thermostat.
- Aluminized steel heat exchanger that contains a ceramic-fiber firepot.
- Roll-formed heat exchanger to minimize welding and to avoid sharp angles.
- A pressure-atomizing, 3450 RPM, flame retention type oil burner is provided with a two-stage fuel pump.
- Electric spark ignition system.
- Combustion air blower and motor.
- Flame-sensing cadmium cell safety system provides shutdown in 15 seconds upon flame-failure.
- A totally enclosed motor with thermal overload protection is directly connected to a balanced propeller fan.
- FP 32037.
- Completely factory assembled, pre-wired, fire tested, and UL listed to utilize fuel oil grade No. 1 or No. 2.
- Quick installation using a 115 volt, 60 Hertz, single-phase power supply and a 24 volt wall mounted thermostat.
- Aluminized steel heat exchanger that contains a ceramic-fiber firepot.
- Roll-formed heat exchanger to minimize welding and to avoid sharp angles.
- A pressure-atomizing, 3450 RPM, flame retention type oil burner is provided with a two-stage fuel pump.
- Electric spark ignition system.
- Combustion air blower and motor.
- Flame-sensing cadmium cell safety system provides shutdown in 15 seconds upon flame-failure.
- A totally enclosed motor with thermal overload protection is directly connected to a balanced propeller fan.
- Advanced burner and burner controls with the latest in burner and burner control technology.
- Durable, attractive casting design is treated for protection against corrosion.
- Quiet, efficient, and safe air move with propeller fan statically balanced and motor resiliently mounted to the figure-proof fan guard.
- Effective heat throw and coverage controlled by manual adjustments of standard horizontal louver blades.
- Superior life expectancy due to corrosion-resistant, 14-gauge aluminized steel heat exchanger and the roll-formed design of the heat exchanger.
- All units are factory-assembled, wired, and fire tested before shipment, making them ready to be installed once they get to the job site.
- Reduced maintenance, easy-to-service with a convenient inspection port and service door opening.
- Supplied with a 1/8” MPT connector and screw terminals.
- Oil Safety Valve – Protects the burner pump from excessive line pressure. The maximum inlet pressure is 60 PSIG.
- Durable, attractive casting design is treated for protection against corrosion.
- Quiet, efficient, and safe air move with propeller fan statically balanced and motor resiliently mounted to the figure-proof fan guard.
- Effective heat throw and coverage controlled by manual adjustments of standard horizontal louver blades.
- Superior life expectancy due to corrosion-resistant, 14-gauge aluminized steel heat exchanger and the roll-formed design of the heat exchanger.
- All units are factory-assembled, wired, and fire tested before shipment, making them ready to be installed once they get to the job site.
- Reduced maintenance, easy-to-service with a convenient inspection port and service door opening.
- Supplied with a 1/8” MPT connector and screw terminals.
- Oil Safety Valve – Protects the burner pump from excessive line pressure. The maximum inlet pressure is 60 PSIG.
Modine POR oil-fired unit heaters offer an efficient and reliable way of heating a space, particularly in regions where supplies of other fuels, such as natural gas, may be unavailable, undependable, or interruptible. The units are direct driven propeller fan-type units designed for overhead suspension and horizontal delivery of heated air. Time-tested and field-proven components are engineered into the design of these compact units, which produce comfort heating at the lowest cost through their highly efficient operation.
Models are UL-listed and require fuel oil grade No. 1 or 2, as specified by ASTM (American Society for Testing and Materials) D396-73 Standard Specifications for Fuel Oils or Canadian Government Specification Board, 3-GP-28.